Oven controls
18
Sensor controls under the display
Sensor con-
trol
Function
Use this sensor control to access the settings when the operat-
ing mode selector is in the 0 or the Lighting position.
Depending on which menu you are in, this sensor control will
take you back a level or back to the main menu.
OK By selecting this sensor control you can access functions such
as the minute minder, save changes to values or settings or con-
firm instructions.
If no cooking programme is in progress, you can use this sensor
control to set a minute minder (e.g. when boiling eggs) at any
point.
If a cooking programme is in progress at the same time, you can
set a minute minder, the cooking duration and a start or end time
for the programme.
Symbols
The following symbols may appear in the display:
Symbol Meaning
This symbol indicates that there is additional information and ad-
vice about using the appliance. Press the OKsensor control to
confirm the information.
Minute minder
A tick indicates the option which is currently selected.
Some settings, e.g. display brightness and buzzer volume are se-
lected using a bar chart.
The system lock prevents the oven being switched on by mistake
(see “Settings – System lock ”).
Remote control (only appears if you are in the Miele@home sys-
tem and have selected the Remote control| On setting)
To Next Page
Loading...
Need help?
General
