Altering the recommended final core
temperature
The recommended target core
temperature can only be altered if both
temperature values (the actual core
temperature on the left and the final
core temperature on the right) (e.g.
30:80) are displayed.
If this is not the case,
–
wait for a few seconds until the
temperature display changes
–
check that the roast probe is
correctly inserted in the socket.
Proceed as follows:
^ As soon as the two temperature
values appear in the display, use the
+ or - buttons to alter the
recommended final core temperature
on the right of the colon in 1 °C steps
(e. g. to 76 °C).
The final core temperature can be
altered between 40 °C and 99 °C.
Altering the recommended oven
temperature
The recommended oven temperature
can only be changed if it is showing in
the display.
If the recommended core temperature
is showing, press the - temperature
button briefly to switch back to the
recommended oven temperature.
Proceed as follows:
^
Whilst the recommended oven
temperature is lit up, use the + and -
buttons to change it.
Practical tips
35
To Next Page
Loading...
Need help?
General
