Operation
54
Changing the set cooking durations
Select the sensor control.
Select the desired time.
Confirm withOK.
Select Change.
Change the set time.
Confirm withOK.
Touch the sensor control to return
to the menu of the selected function.
These settings will be deleted in the
event of a power failure.
Deleting the set cooking durations
Select the sensor control.
Select the desired time.
Confirm withOK.
Select Delete.
Confirm withOK.
Touch the sensor control to return
to the menu of the selected function.
If you delete Duration, the set times for
Finish at and Start at are also deleted.
If you delete Finish atorStart at, the
cooking programme will start using
the cooking duration set.
Cancelling a cooking
programme
Touch the sensor control for the
selected function or the sensor
control.
When Cancel process appears in the
display, confirm withOK.
The oven compartment heating and
lighting will then switch off. Any cooking
durations set will be deleted.
The main menu will appear.
Pre-heating the oven
The Boosteris used in conjunction with
certain functions to quickly pre-heat the
oven.
It is only necessary to pre-heat the oven
in a few instances.
Most dishes can be placed in the
cold oven to make use of the heat
produced during the heating-up
phase.
Pre-heat the oven when cooking the
following food with the following
functions:
– Dark bread dough as well as beef
sirloin joints and fillet with the Fan
plus, Moisture plus and
Conventional heat functions
– Cakes and pastries with a short
cooking duration (approx. 30minutes
or less) as well as delicate items (e.g.
sponge) with the Conventional heat
function (without the Booster function)