Operation
55
Booster
The Boosterfunction is used to quickly
pre-heat the oven compartment.
This function is switched on as the
factory default setting for the following
functions (Further| Settings|
Booster| On):
– Fan plus
– Conventional heat
– Auto roast
– Moisture plus
If you set a temperature above 100°C
and the Boosterfunction is switched on,
a rapid heating-up phase heats the
oven compartment to the set
temperature. The top heat/grill element
and the ring heating element come on
together with the hot air fan.
Delicate items (e.g. sponge or
biscuits) will brown too quickly on
the top if the Boosterfunction is
used.
Switch off the Boosterfunction for
these items.
Switching off theBooster for a
cooking programme
Select the Booster| Offsetting before
selecting the desired function.
The Boosterfunction is switched off
during the heating-up phase. Only the
heating elements associated with the
function are pre-heating the oven
compartment.
If you then want to restart a cooking
programme with the Boosterfunction,
select the Booster| Onsetting to
switch the function on again.