User programmes
89
You can create and save up to 20 of
your own programmes.
– You can combine up to 10cooking
stages to accurately programme your
favourite or most frequently used
recipes. In each cooking stage you
can select settings such as function,
temperature and duration or core
temperature.
– You can specify the shelf level(s) for
the food.
–
You can enter the name of the
programme for your recipe.
When you call up and start your
programme the next time, it will run
automatically.
There are different ways of creating a
User programme:
– At the end of an Automatic
programme, save it as a User
programme.
– After running a programme with a set
duration, save it.
Then name the programme.
Creating a User programme
Select User programmes.
Select Create programme.
You can now specify the settings for the
first cooking stage.
Follow the instructions in the display:
Select and confirm the desired
settings.
If you select the Pre-heatfunction, use
Add to add another cooking stage where
you set a cooking duration. Only then
can you save or start the programme.
All settings for the first cooking stage
have now been set.
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first.
If additional cooking stages are
required, selectAdd and proceed as
for the first cooking stage.
When you have finished setting all the
cooking stages, select Set shelf level.
Select the desired level(s).
Confirm with OK.
If you want to check the settings or to
change them at a later stage, touch
the cooking stage in question.
Select Save.
Enter the programme name using the
keyboard.
You can add a line break for longer
programme names using the
symbol.
Once you have entered the
programme name, select Save.
A message will appear in the display
confirming that the new name has been
saved.
Confirm with OK.
You can start the saved programme
immediately, delay the start or change
the cooking stages.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
