Technical Information
19
Master Chef Ovens
3.0 Commission and Operation
3.1 General Operation
To select a program:
1. Touch the “ON” (“ON/OFF” on double ovens) control.
2. Select the desired function (example: BAKE)
3. Select the desired specific operation from the sub-menu (example:
CONVECTION BAKE)
4. Select the temperature (example: 425
o
)
3.2 Turning off the oven
To turn off the oven, touch the "OFF" (“ON/OFF” on double ovens)
control. The oven will turn off and the time of day will appear in the
display.
3.3 Power Failures
In the event the oven loses power during operation a “Power Failure”
message is displayed as shown in 3-1.
Figure 3-1: ”Power Failure” message displayed
This message is displayed to advise that the incoming power was
disrupted (power failure, etc.). It does not require any type of technical
service.
The ”Power Failure” message can be cleared by performing the following:
1. Turn the oven on by touching the ON/OFF (“ON/OFF” on double
ovens) control.
2. Turn the oven off by touching the ON/OFF (“ON/OFF” on double
ovens) control.
The message is clears.
11:23 PM
Power Failure
To Next Page
Loading...
Need help?
General
