With the aid of the following guide, minor problems can be easily corrected wit
-
hout calling in a Miele service technician, saving you both time and money.
,
Repairs should only be carried out by a suitably qualified and trained per
-
son in accordance with local and national safety regulations. Unauthorised or
incorrect repairs could cause personal injury or damage the dishwasher.
Problem Possible cause Remedy
The "Start/Stop" indica
-
tor light does not flash
after the appliance has
been switched on with
the "On/Off" button.
The door is not properly
closed.
Close the door firmly.
The appliance is not plug
-
ged in.
Insert the plug.
The fuse is defective or
has tripped.
Replace the fuse
(see data plate for
minimum fuse rating).
The dishwasher stops
during a programme.
The fuse is defective or
has tripped.
Replace the fuse
(see data plate for
minimum fuse rating).
The "Water inlet" indica-
tor light lights up and
flashes alternately.
The stopcock is closed. Open the stopcock fully.
The water inlet filter is blo-
cked.
Before rectifying the pro-
blem you must:
–
Press the "Start/Stop"
button for at least one
second.
–
Switch the dishwasher
off using the "On/Off"
button.
Then:
–
Clean the water inlet fil
-
ter, see "Cleaning the
water inlet filter".
The Waterproof system
has reacted.
Call the Miele Service De
-
partment.
Problem solving guide
51
To Next Page
Loading...
Need help?
General
