Please refer to the installation dia
-
gram supplied with the appliance.
,
Furniture and fittings installed
near the dishwasher must be of a
commercial standard able to with
-
stand the effects of steam and con
-
densation.
The appliance must be installed cor
-
rectly and levelled.
Any unevenness in the floor level can
be compensated for and the height of
the dishwasher raised or lowered by
adjusting the four screw feet.
Thise dishwasher is available in diffe-
rent installation versions:
Free-standing
– For installation on its own
– Slot-in or at the end of a row:
This dishwasher can be installed next
to other machines or furniture, or in a
suitable niche. The niche must be at
least 60 cm wide and 60 cm deep.
Integrated ("i") dishwashers
,
To ensure stability, integrated
dishwashers must be installed under
a continuous length of worktop
which is secured to neighbouring
units.
"i" dishwashers are specially designed
for building under a continuous work
-
top.
–
The accessories are included with "i"
dishwashers in a separate package
for on-site fixing.
– The front of "i" model dishwashers is
designed to take a front panel and
can be fitted with a furniture door
front to match the rest of the kitchen.
– These dishwashers do not have a
plinth facing. The plinth area of the
dishwasher needs to be covered eit-
her with a plinth facing to match the
kitchen furniture or with one which
can be ordered as a special acces-
sory. The separate plinth facing can
be height adjusted to suit the kit
-
chen. The plinth return is freely ad
-
justable.
Please refer to the separate installation
instructions supplied with "i" dishwas
-
hers.
Installation
63
To Next Page
Loading...
Need help?
General
