Initial commissioning
19
Opening the door
At the end of programs with a drying
phase (see “Program guide”), the door
will open automatically a little in order to
help the drying process.
This function can be deactivated, if pre-
ferred (see “Settings, AutoOpen”).
Pull the handle to open the door.
Open the door completely to re-en-
gage the door closing mechanism.
If the door is opened during operation,
all functions are automatically inter-
rupted.
Water in the dishwasher may be
hot. Danger of scalding!
Only open the door during operation
if absolutely necessary and exercise
extreme caution when doing so.
Keep the area around the door
free of obstructions.
Closing the door
Push the baskets in.
Then lift the door upwards and push
until it clicks into position.
Danger of crushing injuries!
Do not put your hand inside the door
as it is closing.
To Next Page
Loading...
Need help?
General
