Settings menu
65
AutoOpen Drying
At the end of programs with a drying
phase (see “Program guide”), the door
will open automatically a little in order to
help the drying process.
With the ECO program (if available) the
door opens during the drying phase.
This function can be deactivated if you
wish.
Select the setting you want and con-
firm with OK.
If you have deactivated the auto-
matic door opening function but
would still like to open the door at
the end of the program, then make
sure that you open the door fully.
Otherwise, steam from the dish-
washer could damage the edge of
the counter because the fan is no
longer running.
Optimize standby
The dishwasher is supplied with the Op-
timize standby function switched on as
standard.
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button is pressed or
after the end of a program.
The dishwasher will not switch off in
the event of a fault.
Optimize standby can be switched off if
you prefer. If you do this, the duration
before the dishwasher switches off au-
tomatically increases to approx. 6
hours. Doing this will increase energy
consumption.
Select the setting you want and con-
firm with OK.
BrilliantLight
The dishwasher is fitted with interior
lighting.
When the door is open, the lighting
switches off automatically after 15 min-
utes.
You can also switch off the interior light-
ing permanently.
Select the setting you want and con-
firm with OK.
Software version
You can display the electronic software
version of your dishwasher electronics
for technical support purposes.
Confirm the display with OK.
To Next Page
Loading...
Need help?
General
