Water softener
31
Never fill the container with water.
The container could overflow when filled with salt.
Add salt into the container until the funnel is full but still closes eas-
ily. Do not add any more than 2kg of salt.
As the salt container is being filled, displaced water (brine) may run
out.
Clean any excess salt from around the opening of the container, fo-
cusing especially on the container’s seal. Do not use running water
to rinse away salt residues as this can cause the container to over-
flow.
Close the container.
Do not force the container shut if it has been overfilled.
If an overfilled salt container is forced shut, this may damage the
container.
Remove excess salt before closing the container.
Run the Rinse program after refilling salt.
This will ensure that any traces of salt and brine are dissolved, di-
luted, and rinsed away.
Excess salt and brine which has overflowed can cause corrosion
damage if they are not rinsed away.
To Next Page
Loading...
