Program settings
95
Drying assistance
The additional “Drying assistance” (drying) function accelerates the
drying process at the end of the program.
When the drying assistance function is activated, the Comfort door
lock opens the door a little at the end of the program, allowing steam
to escape from the wash cabinet. The wash items dry passively from
the residual warmth in the wash cabinet.
Wash chamber
cooldown phase
A cooldown pause follows the wash phase. During this pause, water
vapor is extracted from the wash chamber and condensed by the
steam condenser. This reduces the moisture level in the wash cham-
ber, which promotes drying. In addition, this cools the wash chamber
slightly.
...
Cabinet cooling down time
Cabinet cooling time
0
(0 - 30
Min
Min
)
The setting value is entered in increments of 1minute. The possible
range is shown in the bottom line of the display.
Use the arrow buttons (higher) and (lower) to set the cooling
down duration.
Press OK to save the setting.
Drying time
After the cooldown time, the comfort door closing aid opens the door
slightly to allow the moisture and heat remaining in the wash chamber
to dissipate. At this point, the door is unlocked and can be opened at
any time. After the drying time elapses, the message Program finished
appears on the display. Opening the door before the drying time
elapses ends the program prematurely.
...
Drying time
Drying time
0
(0 - 30
Min
Min
)
The setting value is entered in increments of 1minute. The possible
range is shown in the bottom line of the display.
Use the arrow buttons (higher) and (lower) to set the drying
time.
Press OK to save the setting.
To Next Page
Loading...
Need help?
General
