Adding and dispensing process chemicals
44
Unsuitable process chemicals pose a health risk.
Using unsuitable process chemicals will generally cause an unsat-
isfactory wash result and can pose a health risk or cause damage
to property.
Only use process chemicals designed specifically for use in labora-
tory glassware washers and follow the manufacturer’s instructions
on how to use them.
Please follow any instructions relating to non-toxic residues.
Process chemicals pose a health risk.
Some process chemicals may be corrosive and irritant.
Observe the relevant safety codes and safety data sheets issued
by the process chemical manufacturers when handling process
chemicals.
Take all protective measures required by the process chemical
manufacturer, e.g., wear protective goggles and protective gloves.
Contact Miele for information about suitable process chemicals.
Dispensing systems
The machine is equipped with an internal dispensing systems for
process chemicals:
- Rinsing agent
This is dispensed via a storage reservoir in the door.
- Neutralization agent
This is dispensed using a siphon.
- Liquid process chemicals
This is dispensed via a siphon.
Dispensing systems in the door are exempt from monitoring.
Labeling of the
suction wands
Liquid process chemicals from external containers are dispensed by
suction wands. Color coding the suction wands can be helpful for
correct dispensing.
Miele uses and recommends the following:
- Blue: For cleaning agents
- Red: For neutralizing agents
- Green: For chemical disinfection agents or
an additional second cleaning agent
- White: For acidic process chemicals
- Yellow: For free choice
To Next Page
Need help?
General
