Adding and dispensing process chemicals
51
Dispensing pow-
der cleaning
agents
Take care not to inhale powder cleaning agents.
Swallowing process chemicals can cause chemical burns in the
mouth and throat or lead to asphyxiation.
Powder cleaning agents can only be dispensed if the correct type
of dispensing canister, marked with a symbol, is present on the
inside of the door.
Add powder cleaning agent to the dispensing canister with the
symbol before starting the program. Do not dispense powder
cleaning agent in the Rinse and Drain programs.
Press the yellow button on the dispensing canister with the sym-
bol.
The flap will spring open. The flap is always open at the end of a pro-
gram cycle.
The level markers in the powder dispensing canister with the door in
the horizontal position equate to the amount dispensed in milliliters
(ml). The max. capacity is approx. 60ml of cleaning agent.
The amount in ml equates to approx. the amount normally recom-
mended in grams (g) for proprietary powder cleaning agents. Powder
density can affect this amount.
Dispensing example:
Approx. 10.5l of water are taken into the machine for the main
wash. With a cleaning agent concentration of approx. 3g/l, you will
need approx. 30g of cleaning agent. Please observe the manufac-
turer’s recommendations, which may vary!
To Next Page
Loading...
Need help?
General
