Adding and dispensing process chemicals
45
Rinse aid
Rinsing agent is necessary to ensure water does not cling and leave
marks on wash items, and to help wash items dry faster after repro-
cessing.
The rinsing agent in the Final rinse program stage is dispensed auto-
matically. For this, the container must be filled.
Rinsing agent poses a health risk.
Residues of rinsing agent remain on the surface of wash items after
they have dried.
It is important to check the suitability of the rinsing agent being
used on the wash items.
Adding rinse aid
Do not fill with process chemicals.
This would damage the reservoir.
Only fill the rinse aid reservoir with special rinse aid for washer-dis-
infectors.
Open the door fully.
Unscrew the yellow lid with the symbol in the direction of the ar-
row.
The container holds approx. 300ml.
Add rinsing agent only until it is up to the “max.” mark on the edge
of the funnel.
To Next Page
Loading...
Need help?
General
