Water softener
34
Filling the salt container
Use only special, coarse-grained reactivation salt with a granule size
of approx. 1/16“ - 3/16” (1 - 4 mm).
Do not under any circumstances use other types of salt such as table
salt, agricultural or gritting salt. These may contain insoluble additives
which can impair the functioning of the water softener.
Reactivation salt is available from Miele, please contact Miele for or-
dering. See last page for contact information.
Inadvertently filling the salt reservoir with cleaning agent will
cause serious damage to the water softener.
Before filling the salt reservoir make sure that you have picked up
the right packet of reactivation salt.
Open the door to an angle of around 45°. This ensures that the salt
flows into the container more easily.
Press the yellow button with the symbol on the salt container in
the direction of the arrow. The flap will spring open.
Open the funnel.
The container takes approx. 3-4.5 lb (1.4–2kg) of salt, depending on
the type of salt and the remaining fill level.
To Next Page
Loading...
Need help?
General
