Additional settings
73
The Additional settings menu incorporates all administrative processes
and settings.
The Additional settings menu can only be accessed by using a PIN
code.
If you do not have the code, contact a user with appropriate ac-
cess rights or cancel the process using the button.
In the structure overview all options which can be permanently se-
lected have boxes beside them. Factory settings are indicated by a
check . You will find an explanation of how to change settings after
the overview.
Additional settings
Code
Cancel program
Code required
Code not required
Change code
Date
Date format
DD:MM:YY
MM:DD:YY
Set
Log book
Consumption: Water
Consumpt.:Cleaning agent
Consumpt.: Rinse aid
Consumpt.: Neutra. agent
...
Operating hours
Program cycle counter
Service interval
Report
Short
Long
Temperature unit
°C
°F
Program settings
Change program
...
Reset program
...
Air cooling
Yes
No
Release program
All
Selection
...
Move program
Normal plus
Standard
Intensive
Dispensing system
DOS_
Active
Inactive
DOS priming
Concentration
Change name
Test program
No
Laboratory
Validation
Filter maintenance
Coarse filter/HEPA filter
Reset(Yes/No)
Filter combination
Reset(Yes/No)
Interval10
To Next Page
Need help?
General
