The program will be locked
3 minutes after the program has
started when the washer is operated
with a coin mechanism. Canceling
or changing a program is no longer
possible.
Canceling a program
A program can be canceled any time
after a program has started.
^
Turn the program selector to "End".
The washer drains the wash water away
and the program is canceled.
^ Press the "Door" button.
^ Remove the laundry.
or
^ Close the door and start a new
program.
Changing a program
To change a program
A program change is not possible after
a program has started.
To select a different program, the
started program must be canceled.
Adjusting the temperature
Some programs allow you to change
the temperatures up to 5 minutes after
the start.
^
Press OK.
The temperature is highlighted.
^ To change the highlighted
temperature use the +/– buttons.
Confirm with "OK".
Adjusting the spin speed
^ Press OK until the spin speed is
highlighted. Adjust the spin speed
with the +/– buttons. Adjustment is
possible until the start of the final
spin.
Selection of the "Pre-wash" is not
possible after the program has started.
Using the washer
14
To Next Page
Loading...
Need help?
General
