The delay start feature cannot be
used when the washer is operated
by a coin mechanism.
The delay start feature allows you to
start a program at a later time. The
program start can be delayed 30
minutes up to 24 hours.
The time of day must be correctly
set to allow the delay start feature to
function properly.
Setting the delay start
^ Press the m button.
7:51
Start:
7:51
Finish:
9:19
The display shows the current time of
day and the resulting end time.
^ Select the desired program end time
with +.
7:51
Start:
10:32
Finish:
12:00
Pressing the button once delays the
program end to the next full or half hour.
Each touch after that delays it by
30 minutes.
The – button decreases the time.
^
Confirm with "OK".
Starting the delay start
^
Press the "Start" button.
40°C 1200 rpm
Start in: 2:41 h
The display shows in how many hours
and/or minutes the wash program will
start.
Changing the delay start
^
Press the m button.
^ Correct the end time of the program
with the +/– buttons.
^ Confirm with OK.
Canceling the delay start
^ Press the m button.
^ Change the program end time with
the – button until the program start
matches the current time of day.
^
Confirm with OK.
The program starts immediately.
After the program start the actual
load size is measured. This may
result in an earlier program end time.
Delay Start
25
To Next Page
Loading...
Need help?
General
