The display shows a fault message
Display message Possible cause Solution*
q
Drainage fault
–
The drain is blocked.
–
The drain hose is too
high.
–
Clean the drain filter and
the drain pump.
–
The maximum drain
pump height is 3 ft (1 m).
p
Water intake
fault
The water intake/inlet is
blocked.
Possible fault
–
the water valve is
closed.
–
the inlet hose is kinked.
– the filters are blocked.
ä
Drainage lighting
fault
The drum light is not
locked in position.
Check that the drum light is
correctly fitted.
,
Technical
fault
There is a fault. Start the program again.
If the fault message
appears again call Miele’s
Technical Service
Department.
* To cancel an error message, press OK.
Frequently asked questions
31
To Next Page
Loading...
Need help?
General
