,
Repairs to electrical appliances must only be carried out by a qualified and
trained person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held responsible for unauthorized work.
The following section will help you avoid placing a service call by identifying
issues you may encounter while operating the machine:
A wash program cannot be started
Issue Possible cause Solution
The display and the
program selector
remain dark.
The washer has no
power.
Possible fault
– the washer is connected to
the electrical supply,
– the circuit breaker has
tripped.
When selecting the
program
"Drain/Spin" the
program does not
start.
The instructions in
"Before using for the
first time" were not
followed.
Follow the instructions as
described in the "Before using
for the first time" chapter.
The display remains
off.
The machine has gone
into "Standby" mode.
The display shuts off to
save energy.
Press any button. The Standby
function will end.
Frequently asked questions
30
To Next Page
Loading...
Need help?
General
