Miele PWM 300 SmartBiz User Manual

Special features in the programme sequence
32
Spinning
Final spin speed
When a programme is selected, the
maximum spin speed for this wash pro-
gramme is shown in the display.
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart.
Interim spin
There is a spin cycle after the main
wash and between the rinses. A reduc-
tion in the final spin speed will also re-
duce the interim spin speed as appro-
priate.
Omitting the interim spin and the fi-
nal spin
 Touch the sensor control.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
Omitting the final spin (Rinse hold)
 Touch the sensor control (Rinse
hold).
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps to prevent creasing if the
laundry is not going to be removed from
the drum immediately after the end of
the programme.
Starting the final spin after Rinse
hold
The sensor control for the maximum
spin speed lights up in the control field.
You can change the spin speed. The
Start/Stop sensor control flashes slowly.
 Touch the flashing Start/Stop sensor
control.
The final spin is carried out.
Ending the programme after Rinse
hold
 Touch the Start/Stop sensor control
twice and the second time hold it
down until the time display switches
to.
The suds are pumped away. The pro-
gramme has finished.
Anti-crease
At the end of the programme, the drum
continues to turn at intervals for up to
30minutes to help prevent creasing.
The washing machine can be opened at
any time.
There is no anti-crease phase at the
end of some programmes.

Miele PWM 300 SmartBiz Specifications

General

Door color	Silver
Door hinge	Right
Water fill	Cold
Cord length	2 m
Drum volume	64 L
Control type	Rotary, Touch
Loading type	Front-load
Product color	White
Built-in display	Yes
Inlet hose length	1.55 m
Custom panel-ready	No
Door opening angle	167 °
Illumination color	Yellow
Outlet hose length	1.5 m
Appliance placement	Freestanding
Dispenser tray type	3-way
Current	10 A
Connected load	2400 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.4 W
Water consumption per cycle	37 L
Energy consumption washing per cycle	0.76 kWh
Drum capacity	7 kg
Cycle time (max)	199 min
Delay start (max)	24 h
Residual moisture	48 %
Spin-drying class	B
Maximum spin speed	1400 RPM
Noise level (spin)	69 dB
Noise level (wash)	50 dB
Number of washing programs	12
Cycle time (quick washing program)	15 min
Package depth	690 mm
Package width	660 mm
Package height	944 mm
Package weight	95000 g

Weight and Dimensions

Depth	636 mm
Width	596 mm
Height	850 mm
Weight	91000 g
Door diameter	300 mm
Depth with door open	1054 mm