EasyManuals Logo
Home>Miele>Washer>PWM 300 SmartBiz

Miele PWM 300 SmartBiz User Manual

Miele PWM 300 SmartBiz
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Installation
*INSTALLATION*
51
Installation surface
A concrete floor is the most suitable in-
stallation surface, being far less prone
to vibration during the spin cycle than
wooden floorboards or a carpeted sur-
face.
The machine must be level and se-
curely positioned.
To avoid vibrations during spinning,
the machine should not be installed
on soft floor coverings.
If installing on a wooden joist floor:
Install the machine on a plywood
base (at least 70x60x3cm). The
base should span several joists and
be bolted to the joists and not only to
the floorboards.
Tip: If possible, install the machine in a
corner of the room. This is usually the
most stable part of the floor.
Removing the transit bars
Remove the left and right caps.
1. Pull on the secured cap stoppers
2. and use a screwdriver to release the
catches at the top and bottom.
Using the spanner supplied, turn the
left-hand transit bar 90°.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 300 SmartBiz and is the answer not in the manual?

Miele PWM 300 SmartBiz Specifications

General IconGeneral
Door colorSilver
Door hingeRight
Water fillCold
Cord length2 m
Drum volume64 L
Control typeRotary, Touch
Loading typeFront-load
Product colorWhite
Built-in displayYes
Inlet hose length1.55 m
Custom panel-readyNo
Door opening angle167 °
Illumination colorYellow
Outlet hose length1.5 m
Appliance placementFreestanding
Dispenser tray type3-way
Current10 A
Connected load2400 W
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy efficiency scaleA to G
Power consumption (off)0.4 W
Water consumption per cycle37 L
Energy consumption washing per cycle0.76 kWh
Drum capacity7 kg
Cycle time (max)199 min
Delay start (max)24 h
Residual moisture48 %
Spin-drying classB
Maximum spin speed1400 RPM
Noise level (spin)69 dB
Noise level (wash)50 dB
Number of washing programs12
Cycle time (quick washing program)15 min
Package depth690 mm
Package width660 mm
Package height944 mm
Package weight95000 g
Weight and Dimensions IconWeight and Dimensions
Depth636 mm
Width596 mm
Height850 mm
Weight91000 g
Door diameter300 mm
Depth with door open1054 mm

Related product manuals