Before using for the first time
18
Removing the protective foil
and stick
ers
Remove
– the protective foil from the door.
– any stickers from the front and the
lid.
Please do not r
emove any labels
(e.g. the data plate), visible when you
open the door.
After installing the dryer
Befor
e using the tumble dryer for
the first time, ensure that it is instal‐
led and connected to the electricity
supply correctly. If it has not been
transported as described in "Installa‐
tion and connection" then it must be
left to stand for at least 1 hour before
it is connected to the electricity sup‐
ply.
Follow the procedure for using
for the first time outlined in
these instructions.
Rea
d "1. Notes on correct laundry
care" and "2. Load the tumble dryer".
Y
ou can then load the dryer and se‐
lect a programme as described in "3.
Select a programme and start it".
To Next Page
Loading...
Need help?
General
