Miele TKB 440 WP User Manual

Programmable functions
68

Standby
To save energy the display and but‐
t
ons will go out after 10 minutes and
only the
Start/Stop butt
on will flash
slowly. You can alter this setting.
However, standby mode will not occur
in the event of a fault.
Options

Standby switched on:
The display and buttons will go
out aft
er 10 minutes . .
. . . if no selection is made after
switching the dryer on.
. . . after a programme has star‐
ted.
However, the display and buttons
will remain lit up for 10 minutes
after a delay start time has
elapsed, after the end of the pro‐
gramme or at the end of the anti-
crease phase. The buzzer, if se‐
lected, will sound for 10 minutes
after the end of the programme.

Not in current programme (fac‐
t
ory default setting)
As described under . Howev‐
er
, the display and buttons will re‐
main lit up during the programme.

Off
The display and buttons will re‐
main lit up while the dr
yer is
switched on.
To switch the display and buttons back
on again
– Turn the programme selector or press
a butt
on. Neither will have any effect
if a programme is running.
– Open the door while the dryer is
switched on.

Miele TKB 440 WP Specifications

General

Brand	Miele
Model	TKB 440 WP
Category	Dryer
Language	English