Miele TKB 440 WP User Manual

Programmable functions
66
 Code
The code prevents your dryer being
used without your knowledge.
When the code has been activated, you
have t
o enter a code after switching the
dryer on. Otherwise the dryer cannot be
operated.
Options
 F
actory default: off
 Code on
If option  has been select
ed, after
switching on you will have to enter the
code before you can operate the dryer.
To use the dryer when the code is
activa
ted
After the dryer has been switched on,
 will flash in
the time display.
The code is  and cannot be alt
ered.
 Touch the  sensor until a  flash‐
es in the first position.
 Co
nfirm this by pressing the
Start/
Stop butt
on.
 Ent
er the two other numbers in the
same way.
The dryer is ready for use after 
 has
been entered and confirmed.
 Conductivity
 This pr
ogrammable function
should only be set if the residual
moisture reading in your laundry is
incorrect due to extremely soft water.
Conditions
This programmable function should on‐
ly be set if
the water used for washing
the laundry is extremely soft with a con‐
ductivity reading (electrical conductivi‐
ty) less than 150 μS. Contact your local
water authority for the conductivity level
of your mains water supply.
 O
nly activate this programmable
function for the conditions described
above.
Otherwise drying results can be un‐
satisfac
tory.
Options
 Factory default: off
 Low conductivity

Miele TKB 440 WP Specifications

General

Brand	Miele
Model	TKB 440 WP
Category	Dryer
Language	English