EasyManua.ls Logo

Miele WTD 160 - Detergent and water softener usage

Miele WTD 160
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WASHING
36
Detergent
All detergents produced for automatic
washing machines are suitable. Follow
the manufacturer's instructions and
dosage recommendations on the pack-
aging.
The dispensing quantity will depend
on:
- The degree of soiling of the laundry
- The amount of laundry
- The water hardness
Check with your local water supplier
if you do not know the water hard-
ness level in your area.
Water softeners
A water softener can be used to cut
down on the use of detergents in areas
with water hardness levels II and III.
Dispense according to the amount spe-
cified on the packaging. First add deter-
gent and then the water softener.
You can then use the recommended
amount of detergent for water hardness
level I.
Water hardness levels
Hardness
scale
Hardness level
in mmol/l
German scale
°d
I (soft) 0 – 1.5 0 – 8.4
II (medium) 1.5 – 2.5 8.4 – 14
III (hard) above 2.5 above 14
Dispensing aids
Use dispensing aids, (e.g. balls) if these
are supplied with the detergent, particu-
larly when using liquid detergent.
Refill packs of detergent
When purchasing detergent buy refill
packs wherever possible. This helps re-
duce the amount of waste packaging.
Fabric conditioners, liquid starch,
starch
Fabric conditioners make garments soft
to handle and help prevent static cling
when tumble drying.
Liquid starch is synthetic and provides
good stiffness to fabric.
Starch stiffens and gives body to fabric.

Table of Contents

Other manuals for Miele WTD 160

Related product manuals