Delay start/SmartStart
52
Delay start
Delay start is active when the
SmartGrid programmable function
is switched off.
With delay start, you can delay the start
of a programme from 30minutes up to
a maximum of 24hours. This allows
you to make use of night-time economy
electricity rates, for example.
Setting the delay start time
Select the wash programme required.
Touch the sensor control.
The sensor control lights up brightly.
Touch the or sensor control re-
peatedly until the required delay start
time appears on the time display.
- In the case of settings below
10hours, the delay start time
changes in increments of 30minutes.
- In the case of settings above
10hours, the delay start time
changes in increments of 1hour.
Starting delay start
Touch the flashing Start/Add laundry
sensor control.
The delay start process starts and
counts down on the time display.
Changing or cancelling delay start
If the selected delay start function has
started, it is no longer possible to
change the time.
Turn the programme selector to the
position.
Turn the programme selector to any
programme.
Rotating bars ... ... or
are shown on the time display.
The delay start process stops.
Select a programme and a new delay
start time.
To Next Page
Loading...
Need help?
General
