DRYING
42
Tip: In order to use MobileStart, the
washer-dryer must be logged on to the
WiFi network and Remote control must
be switched on.
Once the programme has started, the
washer-dryer can be operated with the
Miele@mobile app.
Selecting drying
Touch the Washing or Drying sensor
control until just the Drying sensor
control is brightly lit up.
The Washing sensor control must
only light up dimly as otherwise the
relevant wash programme would be-
gin before the drying process.
4. Select programme settings
Selecting the drying level
The pre-set drying level for a drying
programme can be changed if re-
quired.
Touch the sensor control for the dry-
ing level you want.
- Normal plus
- Normal
- Hand iron
The sensor control for the selected dry-
ing level lights up brightly.
Selecting a thermospin spin speed
The preset thermospin spin speed for
a drying programme can be changed if
required.
Touch the sensor control for the spin
speed you want.
The sensor control lights up brightly.
Thermospin is not carried out if the
Low temperature extra option has
been selected.
Selecting extra options
The sensor controls for the Low tem-
perature extra option light up dimly if
the Low temperature option can be se-
lected in addition to the programme.
Touch the Low temperature sensor
control.
The sensor control lights up brightly.
Low temperature
Delicate textiles such as acrylics are
dried gently (care label symbol).
The programme running time will in-
crease when Low temperature option is
selected because of the lower temper-
ature.
Selecting the delay start function
You can use delay start to set the start
time for a programme.
Select a delay start time if required.
Please see “Delay start/SmartStart” for
more information.
To Next Page
Loading...
Need help?
General
