Miele WTD 160 User Manual

Changing the programme sequence
50
Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected options cannot be changed
once the machine has been success-
fully started. This prevents the machine
being operated unintentionally, e.g. by
children.
If the washer-dryer is switched off dur-
ing active programme operation, the
standby function does not switch the
washer-dryer off completely after
15minutes. Safety functions continue
to be active because there may still be
water inside the drum.
Cancelling a programme
You can cancel a programme at any
time after it has started.
 Turn the programme selector to the
position.
The programme is interrupted.
 Then turn the programme selector to
any position.
Rotating bars ...... appear
on the time display.
- During washing:
The washer-dryer pumps the suds away
and the wash programme is cancelled.
The door lock is released.
- During drying:
The washer-dryer cools the laundry
down before the door can be opened.
Removing the laundry
 Wait until the symbol in the display
goes out and the door is unlocked.
 Pull the door open and unload the
laundry.
Selecting another programme
 Close the door.
 Select the programme you want to
use.
 Add detergent to the detergent
drawer, if necessary.
 Touch the Start/Add laundrysensor.
The programme will start.

Miele WTD 160 Specifications

General

Brand	Miele
Model	WTD 160
Category	Washer/Dryer
Language	English