Problem solving guide
57
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
A programme does not start
Problem Cause and remedy
The control field re-
mains dark.
There is no power to the washer-dryer.
Check whether the power plug is plugged in.
Check whether the fuse has tripped.
The washer-dryer has switched off automatically to
save energy.
Switch the washer-dryer on again by turning the
programme selector.
and alternate on
the time display.
The door is not closed properly. The door lock could
not engage.
Close the door again.
Start the programme again.
If the fault message appears again, contact the
Miele Customer Service Department.
To Next Page
Loading...
Need help?
General
