27
SECTION 6
PARTS
6.1 GENERAL
This section gives information regarding replace-
able components for the Model XT and Model XW
Pumps. When ordering parts, please refer to the
parts ordering instructions listed under “Recom-
mended Spare Parts” in the Maintenance Section
(Section 4). Be sure to include all required infor-
mation with your parts order, or Milton Roy Com-
pany may be unable to process your order.
NOTE: All drawings in this manual represent
standard configured pumps. Notify Milton Roy
for all special configured pumps.
6.2 ILLUSTRATED PARTS LIST
1. Figure and Item Number Column
a) The item numbers shown in the detailed
parts list correspond to the item numbers
appearing on the exploded view illustra-
tion. To find an unknown part number,
locate the part on the illustration and note
the item number. Look for the item number
on the detailed parts list. The part number
is on the same line. A dash (-) precedes
non-illustrated item numbers.
2. Description Column
a) The name of the item is in the description
column.
3. Part Number Column
a) The supplier’s part number is listed in the
part number column.
4. Quantity Column
a) The numbers appearing in the quantity col-
umn are the total quantity of the listed part
required in its immediate assembly.
5. Reference Code Column
This column is used to denote assembly and detail
part variations among similar components (models)
covered by this publication. When the symbol “A”,
“B”, “C”, etc. is entered in this column, the part is
used only in the model (liquid end and material
codes, see Data Sheets (Referenced Section 1)
and pump data plate at which the symbol appears.
If the column is blank, the part is used in all mod-
els.
To Next Page
Loading...
Need help?
General
