Mindray DPM 7 User Manual

P/N: 046-003757-00 Rev A
Quick Reference Guide
5
Initiate Relearn
To initiate relearning manually on the DPM 6 or DPM 7 bedside monitor:
a. Select ECG Setup menu by selecting ECG waveform/HR numeric tile or
from Parameters menu (
or Main Menu quick keys)
b. Select Relearn
c. Select Main Menu
(quick key) or to return to the main display
Initiate ST Analysis
To initiate ST analysis on the DPM 6 or DPM 7 bedside monitor:
a. Select ECG Setup menu by selecting ECG waveform/HR numeric tile or
from Parameters menu (
or Main Menu quick keys)
b. Select ST Analysis >>
c. Select ON for ST analysis value
d. Select Main Menu
(quick key) or to return to the main display
NIBP
Initiate a Non-Invasive Blood Pressure Measurement (NIBP)
To initiate a NIBP measurement on a patient on the DPM 6 or DPM 7 bedside
monitor:
a. Select
on the front panel of the monitor or the Multi-Parameter
Module (MPM)
Or
a. Select NIBP numeric tile, or enter the NIBP Setup >> from the Parameters
menu in Main Menu
(quick key) to enter the NIBP Setup menu
b. Select Start NIBP
c. Select Main Menu
(quick key) or to return to the main display
Set a Non-Invasive Blood Pressure Measurement Interval
The DPM 6 and DPM 7 allow the clinician to set an interval for a NIBP
measurement to be obtained automatically.
To set an automatic interval on the DPM 6 or DPM 7 bedside monitor:
a. Select NIBP measurement
(quick key) and Select interval

Mindray DPM 7 Specifications

General

Brand	Mindray
Model	DPM 7
Category	Medical Equipment
Language	English