P/N: 046-003757-00 Rev A
Quick Reference Guide
10
c. Scroll and select individual arrhythmia threshold
d. Adjust value using the up and down arrows
e. Select Main Menu
(quick key) or to return to the main display
SILENCE ALARMS
To silence an alarm at the DPM 6 and DPM 7 bedside monitor select Silence
key on front panel of bedside monitor
Panorama® Central Station interface: Selecting Silence at the DPM 6 or
DPM 7 bedside monitor will silence an alarm on the Panorama® Central
Station, WorkStation, and ViewStation for a preconfigured amount of time.
Selecting Mute at the Panorama® Central Station will not silence an alarm at
the DPM 6 or DPM 7 bedside monitor.
SILENCE ALL ALARMS
To silence all alarms at the DPM 6 or DPM 7 bedside monitor for a
preconfigured amount of time, select Alarm Pause key on front panel of
bedside monitor
Panorama® Central Station interface: Selecting Alarm Pause at the DPM 6 or
DPM 7 bedside monitor will silence active alarms on the Panorama® Central
Station, WorkStation, and ViewStation for a preconfigured amount of time.
Selecting Mute at the Panorama® Central Station will not silence alarms at the
DPM 6 or DPM 7 bedside monitor.
TRANSFER (if enabled - 2.13 software or greater)
The DPM 6 or DPM 7 bedside monitor has the ability to transfer patient data
through the MPM (Multi-Parameter Module).
To transfer patient data from one DPM 6 or DPM 7 bedside monitor to another
DPM 6 and DPM bedside monitor:
a. Remove MPM from original DPM 6 or DPM 7 bedside monitor
b. Insert MPM into new DPM 6 or DPM 7 bedside monitor
c. Select from the Select Patient menu:
1. Continue Monitor to continue with the patient data and settings in
the new monitor and delete all patient data and settings in the original
MPM. All patient data in the new monitor will copy to the original MPM.
To Next Page
Loading...
Need help?
General
