Mindray V21 Quick Reference Guide

P/N: 0002-08-50038-00 Rev A
12
Quick Reference Guide
V
V
V
Adjust Print Location
To adjust the print location for a patient on the V12 or V21 bedside monitor:
a. Select Print Setup (Print tab)
b. Select Destination tab
c. Select
1) Real Time to set the Strip location
2) Print on Alarm to set the automatic alarm printing location
(Refer to Alarm Responses tab)
3) Others to set the historical and other reports’ location
d. Select
1) Thermal to print to the modular recorder
2) Laser to print to a predetermined laser printer
3) Laser, Thermal to simultaneously print to the modular recorder and a
predetermined laser printer
e. Select Accept to save settings and return to the main screen
Adjust Waveforms Printing
To adjust printed waveforms on a patient on the V12 or V21 bedside monitor:
a. Select Print Setup (Print tab)
b. Select Setup
c. Select Configuration Waveform
1) Select waveform and select Add to add waveform to the selected list
Or
2) Select waveform from the selected list and select Remove to remove
the waveform from the selected List
d. Select Accept to save settings and return to the Setup tab
e. Select Accept to return to the main screen

Mindray V21 Specifications

General

Brand	Mindray
Model	V21
Category	Medical Equipment
Language	English