3.2 Operation
OPERATION
53
3.2 Operation
3.2.1 Pre-operation checks
Before starting operation, check the following:
•
Safety
Perform test operation after making sure that safety is ensured if the machine should become out of
control.
•
Machine
Make sure that the machine is free of damage.
•
Parameters
Set the parameter values to match the operating machine system environment.
•
Test operation
Perform test operation and make sure that the machine operates safely under light load at a low frequency.
After that, start operation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
