Calling for service
If you have a problem that you are unable to correct, consult your
MITSUBISH[ dealer or MITSUBISHI Authorized Warranty Service
Center.
Do not adjust any controls not described in this owner's guide.
Do not remove the protective back cover of this unit.
If you see the following display on your screen, you should not
change any settings. This is a special display used by the factory.
Initial
E2RESET
Hotel : Off
CCD : On
Auto clock : On
Call }elf. : On
Net name : On
Prog name : On
Prog descr : On
If this display appears, make sure that all of the on/off settings are
the same as the illustration above and then turn the TV off. If any
of the settings are different than the illustration abo_e, turn the TV
off and consult your Mitsubishi dealer or Mitsubishi Authorized
Warranty Service Center.
Troubleshooting 99