$ Basic Connections
This section explains the basic connections you will need to make
between your TV, antennas, and VCR. You will see there _xe
different connections shown depending upon whether you ihave a
decoder box and the type of antenna you are using. Choose the type
of connection for the equipment you have.
This section explains:
• TV+external speakers,
• TV+antenna or cable without a decoder box,
• TV+cable with a decoder box,
• TV+separate UHF and VHF antennas,,
• TV+VCR+antenna or cable without a decoder box,
• TV+VCR+cable with a decoder box,
• TV+home theater receiver (A/V receiver),
• TV+audio system, and
• TV+Mitsubishi products that have _JV Network
terminals.
_>Important: You must connect a VCR to see two active images when _Lsing
Picture-In-Picture (PIP).
28 Chapter 2 : Connecting Your TV
To Next Page
Loading...
Need help?
General
