_>Important:
TV+home theater receiver (AN receiver)
equipment you will need
To hook up a home theater receiver, :you will need:
1 set of RCA pin-type audio
cables,
2 RCA pin-type video cables
(if connecting a standard VCR),
or
1 Super Video cable (S-VHS)
and 1 RCA pin-type video cable
for a Super VHS home theater
receiver.
Procedure
(Please see illustration on
the following page).
0
Connect one end of an RCA pin-type video cable to the _I
VIDEO INPUT terminal of the home theater receiver. C
the other end of this cable to the VIDEO TUNER OUTP
terminal on the back of the television.
O
Connect one end of an RCA pin-type video cable to the
OUTPUT terminal of the home theater receiver. Connec
other end of this cable to the EXT-]_ VIDEO INPUT tern
the back of the television.
If you are connecting a Super VHS (S-VHS) receiver, conne
Super Video cable to the S-VIDEO OUTPUT terminal of th,
theater receiver. Connect the other end of this cable to the ]
VIDEO INPUT terminal on the back of the television.
Connect a set of RCA pin-type audio cables to the TV A[
INPUT terminal of the home theater receiver. Use the r_
to connect the right (R) channel and the white cable for
ing the ]eft (L) channel
Connect the other ends of this cable_ to the left and right
TUNER OUTPUT ter_inals on the back of the televisioI
40 Chapter 2 : Connecting Your TV
To Next Page
Loading...
Need help?
General
