Remote control buttons and functions (cont.)
@
select buttons
Use these buttons to select the component you wish to operate:
the TV, an audio component (in the CABLE layer), VCR-A or
VCR-B. These are also used to set up your remote control for
your particular brand of VCR.
®
VCR buttons
These buttons can be used to control VCRs. These are
pre-programmed to operate select MiLsubishi components. As for
the PLAY button, see "Using the Active A/V Network Feature,"
page 9].
@ power button (POWER)
Use to turn the TV on or off.
@
®
®
©
mute control (MUTE)
Use to turn the sound off completely or restore it to its original
volume.
super quick view button (SQV)
Press to view channels you have pro_wammed into the super
quick view memory.
quick view button (QV)
Press to switch to the channel you have stored into the quick
view memory.
light button
Press this button to light up the labds on the remote control for
three seconds.
® volume control (VOLUME)
Press the top part of the button to turn up the volume; press the
bottom part of the button to turn down the volume.
®
input button (INPUT)
Use to select the input source you wish to watch:
• AntennaA,
• AntennaB, or
• External 1, 2, or 3.
channel control (CHANNEL)
Press the top part of the button to change to a channel with a
higher number; press the bottom part to change to a channel
with a lower number
enter button (ENTER)
May be used after selecting a channel number or an item from
the on-screen menu system. Also use with the PIP function.
audio and video controls
These buttons are used in pairs to adjust features of the image
or sound (other than volume) with a two-step process: using one
of the audio or video buttons to select a function, and then using
the adjust up/down button or right/left button to adjust the
function.
22 Chapter 1 : Getting to Know Your TV
To Next Page
Loading...
Need help?
General
