Remote control buttons and functions (cont.)
(_) home button (HOME)
Press to return to regular TV viewing from the on-screen dis-
plays and menus.
(_ quick program button (QUICK PROGRAM)
Use this button to perform automated prolffamming operations
with both your TV and your Mitsubishi VCR. When you press
this button, your TV will switch to the External-1 inpul_, your
VCR will turn on, and the VCR% "Program to record" menu will
appear. When you are finished programm!ing your VCI%, press
this button again; your VCR wil! turn off, and your TV will
return to its previous position.
If you press this button while the TV is locked, or while using
the television's menus, then the VCR will turn on, but the TV
will not switch inputs.
Additionally, you must have connected your VCR with the AN
Network.
(_ number buttons (0-9)
Use to select a channel number, and to enter the parental lock
code.
(_ off-timer button (OFF-T)
Use to program the TV to turn off automatically at a later time.
@ picture-in-picture controls
Use to control the special picture-in-picture (PIP) function.
• PIP button (PIP)---Press to see the reduced PIP image or
cancel it. (This is also an Active A/V Network feature. See
"Using the Active A/V Network Feature," page 91.)
° channel button (CHANNEL)---Press to change the channel
of the reduced PIP image.
° source button (SOURCE)---Press repeatedly to switch the
source of the reduced PIP image between the TV and the
external inputs.
• pause button (PAUSE)---Press to fi'eeze the reduced PIP
image or cancel the image freezing. Also use for the advanced
PIP functions.
• enter button (ENTER)---Press to switch back and forth
between the reduced PIP image and the main image.
• adjust up/down buttons, right/left buttons---Press to
move the position of the reduced PIP image.
24 Chapter 1 : Getting to Know Your TV
To Next Page
Loading...
Need help?
General
