Problems Possible Solutions For More Information
On-screen displays appear
each time you adjust a
function.
• This is part of the normal
operation of the TV.
See "Understanding the On-
Screen Displays" in Chapter
4 for a full explanation of
the on-screen displays.
There's no sound even when
the volume is turned up.
Check that the MUTE
button isn't on.
Check the setting of the
"Speaker: Internal/Exter-
nal" function.
See. "Remote control but-
tons and functions" in
Chapter 1, which explains
the location and function of
the MUTE button.
See "Adjusting the sound"
in Chapter 3, which explains
how to switch the speakers
between "Internal" and
"External."
• You forget the code you used
to set the parental lock.
• Use the alternate procedure
that doesn't require the use
of the code.
• See the Appendix "Auto-
matic Procedure for the
Parental Lock."
You can't program the TV to
turn on automatically.
• The TV may be locked.
See "Using the parental
lock" in "Using the Ad-
vanced Features," in
Chapter 3.
The sound doesn't match the
image on screen.
• The TV's reception mode
may be set to "separate
audio program (SAP)."
See "AdjusKng the sound"
in Chapter 3, which explains
how to select the appropri-
ate reception mode.
The TV picture shows a
slight color impurity.
There is a black rectangle
on the screen.
The 2W picture may be
affected by the magnetic
force of the earth. Press
the DEGAUSS button.
The TV has been set to
"text" mode, but there is no
text information being
broadcast.
See "Using the closed
caption decoder" under
"Getting Started" in
Chapter 3.
Troubleshooting 9'7
To Next Page
Loading...
Need help?
General
