Mitsubishi ECLIPSE CROSS 2017 User Manual

ECO Score
E00531601177
ECO score indicates the points you have
scored on fuel-efficient driving by the num-
ber of leaves as follows:
[When the ignition switch or the operation
mode is ON]
The display shows the score you achieved in
the last several minutes.
[When the ignition switch is turned off or the
operation mode is put in OFF]
The display shows the overall ECO score the
function has counted from the time when the
ignition switch is turned to “ON” to the time
when it is turned to “LOCK” or “ACC”, or
from the time when the operation mode is set
to ON to the time when it is set to OFF.
ECO drive level
Low High
Changing the function settings
E00522702212
The “Display language”, “Temperature unit”,
“Fuel consumption unit”, and “Average fuel
consumption and speed reset method” etc.
setting can be modified as desired.
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put
the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into
the “P” (PARK) position (CVT).
2. Press the
switch or switch a few
times to switch the information screen to
the function setting screen.
Refer to “Information screen (when the
ignition switch or the operation mode is
ON)” on page 5-05.
CAUTION
l
For safety, stop the vehicle before operating.
While driving, even if you operate the multi-
information display switches ( , , ),
the function setting screen is not displayed.
3. Press the switch to switch to the top
screen (A) for the menu screens. Then,
press the switch or switch to
switch to the menu screens (B).
Multi-information display
5-13
OGKE18E1
Instruments and controls
5

Mitsubishi ECLIPSE CROSS 2017 Specifications

General

Brand	Mitsubishi
Model	ECLIPSE CROSS 2017
Category	Automobile
Language	English