8 - 6
8. LOADING AND INSTALLATION
8.2 Installation Environment
Avoid the following environment when you install the programmable controller system:
(1) A location in which the ambient temperature falls outside the range of 0 to 55 .
(2) A location in which the ambient humidity falls outside the range of 10 to 90%RH.
(3) Location in which condensation may occur due to drastic changes in temperature.
(4) A location in which corrosive gas or combustible gas exists.
(5) A location in which a lot of conductive powdery substance such as dust and iron
filing, oil mist, salt, or organic solvent exists.
(6) A location exposed to direct sunlight.
(7) A location in which strong electric fields or magnetic fields form.
(8) A location in which the main unit is exposed to direct vibration or impact.
To Next Page
Loading...
Need help?
General
