Mitsubishi MELSEC-A A2ASCPU-S1 User Manual

2 - 7
2. SYSTEM CONFIGURATION
2.2.2 Software package
(1) GPP function software packages and model name setting at the start-up
The table below shows the GPP function software packages allowing you to create
the A2USCPU program and PLC model settings at start-up.
When creating a CPU module program, set the PLC type "A2USH-S1", "A2US (S1)",
"A2AS(S1)" or "A2AS-S30" according to the CPU usage modules.
When "A2USH-S1", "A2AS-S30" is not in the PLC type, set "A3U". When "A2US
(S1)", "A2AS(S1)" is not, set "A2U".
When "A3U" is not, set "A3A". When "A2U" is not, set "A2A".
When "A3U", "A3A", "A2U" or "A2A" are not, set "A3H".
Peripheral
Device
Software package for system
start-up
Programmable controller CPU model setting
Remark
A2USH-S1 A2US(S1) A2AS-S30 A2AS(S1)
PC/AT
personal
computer
SW IVD-GPPA ( is 1 to 3.)
A3U A2U A3A A2A
SW IVD-GPPA ( is 4 or later.)
A2USH-S1 A2US A2AS-S30 A2AS(S1)
GX Developer
A6PHP
SW3GP-GPPA A3H A3H A3H A3H
Writing on the ROM
is not allowed.
SW4GP-GPPA A3A A2A A3A A2A
SW GP-GPPAU
A3U A2U A3A A2A
A6GPP SW3GP-GPPA
SW3GP-GPPA
A3H A3H A3H A3H
Writing on the ROM
is not allowed.
SW4GP-GPPA A3A A2A A3A A2A
SW GP-GPPAU
A3U A2U A3A A2A

Mitsubishi MELSEC-A A2ASCPU-S1 Specifications

General

Brand	Mitsubishi
Model	MELSEC-A A2ASCPU-S1
Category	Controller
Language	English