App - 1
APPENDIX
APPENDIX
Appendix1 Instruction List
The instruction list to be used with a programmable controller is shown.
Refer to the following Programming Manuals for the details of the instructions.
(1) Sequence instructions
(a) Contact instruction
(b) Association command
(c) Output instruction
(d) Shift instruction
(e) Master control instruction
(f) End instruction
(g) Other instructions
• ACPU/QCPU-A (A Mode) Programming Manual (Fundamentals)
• ACPU Programming Manual (Common Instructions)
• AnSHCPU/AnACPU/AnUCPU/QCPU-A (A Mode)
Programming Manual (Dedicated Instructions)
• AnACPU/AnUCPU Programming Manual (AD57 Instructions)
• AnACPU/AnUCPU/QCPU-A (A Mode) Programming Manual (PID
Control Instructions)
IB-66249
IB-66250
IB-66251
IB-66257
IB-66258
Contact LD, LDI, AND, ANI, OR, ORI
Association ANB, ORB, MPS, MRD, MPP
Output OUT, SET, RST, PLS, PLF
Shift SFT, SFTP
Master control MC, MCR
Program end FEND, END
Stop STOP
No operation NOP
Page break (Page break operation for printer
output)
NOPLF
To Next Page
Loading...
Need help?
General
