Mitsubishi MELSEC-A A2ASCPU-S1 User Manual

App - 49
APPENDIX
(b) For A2USCPU(S1)
(c) For A2SCPU-S30
No.
Product used to write to the
CPU module
Product used to read from
the CPU module
Compatibility
1
Conventional product
(PLC: A2A start-up)
New Product
(PLC: A2A start-up)
• All the data are compatible.
2
New Product
(PLC: A2A start-up)
Conventional product
(PLC: A2A start-up)
3
Conventional product
(PLC: A2A start-up)
New Product
(PLC: A2U start-up)
• Because the PLC model names are different between in
writing and in reading, the following conditions are
identified.
1) If the verification is performed after reading, mismatch is
identified.
(The data can be used.)
2) Set values of the sampling trace/status latch (data stored
in the CPU module) will not be displayed.
3) When the network parameters are set to the new product,
they will not be displayed on the conventional product.
4
New Product
(PLC: A2U start-up)
Conventional product
(PLC: A2A start-up)
No.
Product used to write to the
CPU module
Product used to read from
the CPU module
Compatibility
1
Conventional product
(PLC: A3A start-up)
New Product
(PLC: A3A start-up)
• All the data are compatible.
2
New Product
(PLC: A3A start-up)
Conventional product
(PLC: A3A start-up)
3
Conventional product
(PLC: A3A start-up)
New Product
(PLC: A3U start-up)
• Because the PLC model names are different between in
writing and in reading, the following conditions are
identified.
1) If the verification is performed after reading, mismatch is
identified.
(The data can be used.)
2) Set values of the sampling trace/status latch (data stored
in the CPU module) will not be displayed.
3) When the network parameters are set to the new product,
they will not be displayed on the conventional product.
4
New Product
(PLC: A3U start-up)
Conventional product
(PLC: A3A start-up)

Mitsubishi MELSEC-A A2ASCPU-S1 Specifications

General

Brand	Mitsubishi
Model	MELSEC-A A2ASCPU-S1
Category	Controller
Language	English