2 - 5
SYSTEM CONFIGURATION2.
(c) When a remote I/O network is constructed with the MELSECNET/10 network
system, use the A2USHCPU-S1 software of version "A" or later, and the
AJ71LP21/LR21/BR11, A1SJ71LP21/BR11-type network software of version "J"
or later.
<Example> For AJ71LP21/BR11:
(d) When a remote I/O network is constructed with the MELSECNET/10 network
system, use the A2USCPU(S1), A2ASCPU, A2ASCPU-S1 software of version
"D" or later, the A2ASCPU-S30 software of version "L" or later, and the
AJ71LP21/LR21/BR11, A1SJ71LP21/BR11-type network software of version "J"
or later.
<Example> For AJ71LP21/BR11:
REMARK
The special function modules which cannot be used by the A2USHCPU-S1 are as
follows:
Confirm the manufactured date on the rating plate.
(3) Peripheral Device
Among the programming units (A7PUS, A8PUE), only A7PUS is installed as an add-
on system.
Other models (A8PUE) use only the hand-held system with a cable.
AJ71C23
(modules dated before February 1987)
AD57-S2
AJ71C24
(modules dated before February 1987)
AD51
(modules dated before March 1987)
To Next Page
Loading...
Need help?
General
