Mitsubishi MELSEC-A series User Manual

6. PROGRAMMtNG /MELSEC-A
preceding page)
(Continued from I
I RST Y12
RST Y13
Y axis start
Zero Y axis
Y axis start
( SET
Y11 1
Zero Y axis
, SET
Y14 1
RST
1
Yll
RST
Y14
Writes
X axis start data No. to
buffer
memory
X axis pointer write
Y axis start data
No. write
Y axis pointer write
X axis start
lnterpolatlon start
X axis zeroing start
X axis start reset
Interpolation start reset
X axis zeroing start reset
Y axis start
Y axis start
Y axis zeroing start
Y axis start reset
Y axis zeroing start reset
1
Note: For time schedule, refer to Fig. 3.42 (page 3-56).

Mitsubishi MELSEC-A series Specifications

General

Type	Programmable Logic Controller (PLC)
Series	MELSEC-A
I/O Capacity	Varies depending on the CPU and expansion modules used.
I/O Points	Varies depending on the CPU and expansion modules used.
Programming Language	Instruction List
Program Memory	Varies by model
Data Memory	Varies by model
Communication Protocols	MELSECNET
Communication Ports	Varies by model
Power Supply	AC 100-240V, DC 24V (varies by model)
Expansion Modules	Available (varies by model)
I/O Modules	Digital, Analog
Memory	RAM, EEPROM
Operating Temperature	0°C to 55°C
Storage Temperature	-25°C to 75°C
Humidity	5 to 95% RH, non-condensing
Vibration Resistance	10 to 57Hz: 0.075mm amplitude, 57 to 150Hz: 9.8m/s²