Mitsubishi MELSEC-A series User Manual

6, PROGRAMMING /MELSEC-A
(b) Positioning has been stopped using the "BREAK" key on the
G PP
The "BREAK" key stops both the X and Y axes. Positioning
can be restarted when both axes are not busy.

Mitsubishi MELSEC-A series Specifications

General

Type	Programmable Logic Controller (PLC)
Series	MELSEC-A
I/O Capacity	Varies depending on the CPU and expansion modules used.
I/O Points	Varies depending on the CPU and expansion modules used.
Programming Language	Instruction List
Program Memory	Varies by model
Data Memory	Varies by model
Communication Protocols	MELSECNET
Communication Ports	Varies by model
Power Supply	AC 100-240V, DC 24V (varies by model)
Expansion Modules	Available (varies by model)
I/O Modules	Digital, Analog
Memory	RAM, EEPROM
Operating Temperature	0°C to 55°C
Storage Temperature	-25°C to 75°C
Humidity	5 to 95% RH, non-condensing
Vibration Resistance	10 to 57Hz: 0.075mm amplitude, 57 to 150Hz: 9.8m/s²